Sri Balaji Chemical & Instruments
Ashok Vihar, New Delhi, Delhi
GST No. 07ADTFS8933N1ZY
TrustSEAL Verified
Call 0804763053085% Response Rate
SEND EMAIL
Product Details:
| Material | SS |
| Brand | Sri Balaji |
| Fire nozzle dia | 9.5 mm |
| Fire height | 38 mm |
| Accuracy | +/-2 mm |
| Sample clamp | 360 x 100mm |
| Interior dimension | 330x50mm |
| Nozzle to Sample | 19 mm |
| ISO 3795 | FMVSS 302 | DIN 75200 | SAE J369 |
| ASTM D5132 | JIS D1201 | BSAU 1690 | GB 8410 |
| PSA-Renault standard D45 1333 |
Product Details:
| Minimum Order Quantity | 01 piece |
| Material | Stainless Steel (SS) |
| Capacity | 12 Beakers |
| Usage/Application | Sample Dyeing of fabric and yarn at high temperature and pressure |
| Machine Type | Semi-Automatic |
| Phase | 3 Phase |
| I Deal In | New Only |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Display Type | Analog |
| Brand | Sri Balaji |
| Material | Mild Steel |
| Color | Mettalic Blue |
| Size/Dimension | 1100 x 1270 x 65 mm |
| Length | 1100 mm |
Itis used to determine the stretch & recovery of the Elastic fabric in case of both woven & knitted fabrics or Lycra Fabric. It gives the percentage of stretch. Sturdy loading aluminum frame and screw tensioning Device. Static load is applied for a specific time and released. Percentage of elongation is read directly from the scale on the apparatus. Supplied with 30N, 2.3kg, 1.8kg, 1.3kg rectangular loads With stainless steel hook. Supplied with calibration certificate (Traceable to NABL)
Additional Information:
Product Details:
| Type of PH Meter | Table-Top, Hand-Held, Portable |
| Usage/Application | Measurement |
| Brand | Sri Balaji |
| Packaging Type | Box |
| Resolution | 0.1 or 1 mV |
| Display Type | LCD |
| Type | Digital |
| Accuracy | +-0.01 pH |
| Meter Type | Bench top |
| Connectionsp H | BNC; Temperature 2.5 mm |
| Min pH | 2 PH |
| Max pH | 16 PH |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Grade | Manual |
| Color | Blue |
| Type of Testing Machines | Textile Testing |
| Automation Grade | Automatic |
| Accuracy | 0.1-2% |
| Tilt angle | 45 Deg |
v Used to determine the bending modulus & Flexural rigidity of any type of fabrics.
v Top scale graduated in (0 to 16) centimeter, weight 270gms strictly meets the specification of ASTM standards.
v Any fabric can be checked in this instrument except those fabrics have high inclination to curl at end after cutting.
v This instrument directly gives the bending length to calculate bending modulus & Flexural rigidity from calculation.
v Supplied with complete accessories along with two templates for preparing sample.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Display Type | Digital |
| Light Source | MBTL (Mercury Blinded Tungsten Lamp) Fading Lamp 500 W |
| Specimen Size | 100 X 50 Mm |
| Water Tank | Stainless Steel |
| Power Consumption | 0.75 kWH |
| Power | 230 V AC,Single Phase 50 Hz |
| Temperature inside Chamber | Ambient to 50 Deg C |
| Humidity inside Chamber | 50 - 60 % RH |
| Humidity Control | By Cylindrical Cells (50Nos) |
| Specimen Holders | Made of Stainless Steel |
| No of Specimen Holders | 4 Nos |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Power | 230 V |
| Display Type | Analog |
| Brand | Sri Balaji |
| Material | MS, SS |
| Nozzle | 19 holes of Di 0.9mm |
| Angle of holder | 45 Deg |
| Holder | 150mm below the nozzle |
| Measuring Cup | 250 mm |
v To measure the resistance of fabrics to wetting by water.
v Completely made of SS grade 316.
v Stainless steel standard nozzle as per AATCC standard.
v Specimen at 45° to meet the American standard.
v The equipment is supplied in a specially designed tray.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Laboratory |
| Brand | Sri Balaji |
| Application | Industrial, Laboratory |
| Material | SS |
| Grade | Manual |
| Model Name/Number | Sri Balaji Perspirometer |
| Condition | New |
| Country of Origin | Made in India |
v To determine colorfastness to perspiration.
v Completely made out of stainless steel ( Grade 316).
v Supplied with 5Kg dead weights as per ISO standards & 4.54 Kgs as per AATCC.
v Complete with single unit and 2 Dead Weights.
v Up to 20 samples can be tested at a time .
v Complete with all accessories –Single Unit, 21 acrylic palates, 200 adjacent fabrics etc.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Mild Steel |
| Model Name/Number | Sri Balaji |
| Display Type | Analog |
| Series | Table Top |
| Automation Grade | Semi-Automatic |
| Brand | Sri Balaji |
v To access stretch or extension of woven & knitted fabrics.
v Stretch or extension percentage can be directly evaluated from the scale.
v Two Scale graduated, 0-50% for woven fabrics & 0-300% for knitted fabrics.
v Stainless steel knobs for tightening the jaws for holding samples.
v Smooth, precision-engineered components for exceptional performance.
v Complete withal accessories-two dead weight 2kg & one dead weight 1kg., two sample marking template & marking pen, scissor.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Display Type | Analog |
| Brand | Sri Balaji |
| Material | S S |
| Automation Grade | Manual |
| Color | Grey |
| Least Count | 250 gms |
| Weight | 25 Kgs |
v Used to determine the pulling strength of any type of button & snaps used in garments
v With maximum capacity 30Kgf & Least Count 250Gms.
v Three different types of jaws supplied to grip different type of buttons & snaps.
v Pull & Push type dial gives maximum accuracy.
v Protective goggle is provided for safety.
v Supplied with all accessories along with 15lbs calibration weight to calibrate the instrument.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Material | SS |
| Brand | Sri BALAJI |
| Display Type | Digital |
| Grade | Automatic |
| Time Display and accuracy | 0-999.9s, 0.1s |
| Ignition time | 1 +/- 0.05s |
| Dimension of holder outside | 205 x 76 mm, interior 165 x 40 mm |
| Distance from nozzle to specimen | 8 mm |
Stainless steel test cabinet with glass observation panel provides with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device is included.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Sri Balaji |
| Automation Grade | Manual |
| Material | SS |
| Sample Width | 300 mm or 500 mm |
| Sample Height | 20 mm |
| Base Pad Size | 300 x 300 mm,500 x 500 mm |
| Machine Weight | 50 kg Approx |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Industrial |
| Shape | Rectangular |
| Temperature Range | 200-450 Deg C |
| Automation Grade | Automatic |
| Brand | Sri Balaji |
| Material | SS |
| Inside Chamber Size | 18x18x24Inch |
| Voltage | 220-240V |
v Specially designed to condition samples before & after testing.
v Ambient conditioning condition, Temperature 22±2°C & humidity 65%±3% can be easily attended.
v Transparent viewing window to see the sample.
v One Day tube light fitted inside the chamber for viewing the sample.
v Caster wheel at base for easy movement.
v Three perforated trays supplied with the equipment to keep the samples properly in side the chamber.
v Inner Chamber Size : 600 X 600 X 600 mm. 8.0 Cubic .feet / 225 Litres
v Special handle with lock for user convenience.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Max Temperature (deg. Celsius) | 200-300 deg. Celsius |
| Air Circulation | Motorized Recirculation |
| No of Chamber | Two |
| Body Material | Mild Steel, Stainless Steel |
| Display Type | Digital |
| Material | Stainless Steel |
| No. Of Shelves | 2 Adjustable Perforated Selves |
| Door Type | Single Door |
| Brand | Sri Balaji |
| Body Structure | Double Walled structure filled with glass wool insulation |
| Temp Display | Digital Temp display |
| Accuracy | 0.1 Deg C |
| Power | 220 Volt AC 50 Hz. Single Phase |
| Outside Body | MS Powder coated with stove enamel paint. (Fully SS Models also Available) |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | Tearing Strength Tester 6.4 Kgs |
| Usage/Application | Laboratory |
| Type Of Testing Machines | QC testing |
| Color | Blue |
| Packaging Type | Box |
| Display Type | Analog |
| Brand | Sri Balaji |
| Material | SS |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model Name/Number | Tensile Strength Tester |
| Usage/Application | Laboratory |
| Color | Blue |
| Packaging Type | Wooden Box |
| Display Type | Digital |
| Operating Mode | Automatic |
| Capacity of Tester | 0-250kg |
| Least Count | 0.1 Kg (100g) |
| Speed of the Machine | 100mm/300mm Per/min Speed |
| Min Jaw Separation | 30mm |
| Motor | 1/2+H.P single Phase |
| Elongation display | Digital |
| Panel Switches | Push Switches For Load, Unload Stop |
| Dimension | 60cm X 40cm X 185 Cm |
| Weight | 170 Kg |
v To determine tensile strength of fabrics and leas.
v Maximum capacity 250Kg with 100gms accuracy, works on CRE principle.
v Digital control panel.
v Maximum jaw separation 850mm & minimum jaw separation 25mm.
v One inch & four inch jaws supplied to conduct grab test & seam slippage.
v Lea strength Jaw to check lea strength.
v Complete with all accessories-Grab test & Seam Slippage templates, 6 mm gauge, a scissor, marking pen, one inch, four inch & lea strength jaws.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Display Type | Digital |
| DisplayType | PID |
| Test Fluid | Glycerin |
| Brand | Sri Balaji |
| Capacity | 35 kg/cm2. / 70kg/cm2 |
| Opening in upper clamp | 30.5 Mm |
| Opening in lower clamp | 38.1 Mm |
| Rate of fluid displacement | 95 Cc/ Minute. |
vTo determine bursting strength of knitted fabrics, paper, Corrugated Boxes.
vLatest design with digital control panel.
vMaximum capacity 35 kg/ sq cm.
vGlycerin used as test fluid.
vComplete with all accessories including calibrated aluminum foil for calibration, two diaphragms, & a clamp opening vice.
vSupplied with calibration certificate (Traceable to NPL).
Additional Information:
Product Details:
| Type | Thickness Tester |
| Display Type | Digital |
| Usage/Application | Industrial |
| Brand | Sri Balaji |
| Material | MS,SS |
| Measuring Accuracy | 0.01mm or 0.001mm |
| Packaging Type | Box |
| Range of thickness | 0.01~25mm or 0.001~25mm |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Automatic |
| Brand | Sri Balaji |
| Material | SS |
| Number Of Pilling Drums | 2 |
| Rotational speed | 60 rpm |
| Timer Range | 0~99h 99min |
| Counter | 2-99999 |
| Specimen Size | 140 mm |
| Specimen Weight | 52.5g |
| Power Supply | AC220V+/-10%,50Hz,120W |
| Volume Of Drum | 235mm |
v To access resistance to pilling of any type of fabrics as per ICI pilling Standard.
v 3mm cork lining inside the boxes for proper pilling action.
v Complete with all accessories- Specimen Mounting Jig, Specimen Insertion Tool, Specimen Mounting Tape, Specimen Marking pen, Pilling Test Template, Set of Pilling Tubes (8 Nos) and a Scissors
v Supplied with calibration certificate (Traceable to NABL) .
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Brand | Sri Balaji |
| Weight | 05 Kg. (Approx.) |
| Frequency | 50Hz-60 Hz |
| Voltage | 110- 230V AC |
| Light | DAY Light (optional CWF Tube) |
| Color Temperature | 4100K - 4500K |
| Viewing area | Painted black |
| Viewing Angle | 45 Deg |
| Overall Dimensions | 345mm 245mm 240mm |
Salient Features
Additional Information:
Product Details:
| Material | SS |
| Automation Grade | Automatic |
| Display Type | LCD |
| Model Name/Number | PT-1171B |
| Test speed (Mm/Minute) | 50 to 300mm |
| Brand | Sri Balaji |
| Capacity Selection | 2,5,10,25,50,100,200 kgf |
| Measurement and control software | Windows Under the platform |
| Accuracy of measurement | Be better than+-1%(GB-1Level accuracy) |
| Force resolution | 1/200,000 |
Tensile Testing Equipment Introduction:
Computerized Tensile Testing Equipment Pull Strength Testing Machine For Tape is for the company's newly developed a patented product (Patent No. 200730055891.1) for in hardware, rubber plastic, paper products, printing and packaging, adhesive tape, bags handbags, textile, medicine, daily chemical, food, electronic wire, etc. industries. It can be used in various materials, semi-finished products and finished products, such as tension, pressure, bending, folding, cutting, tearing and peeling tests
Detail Parameters:
| Product Name | Computerized Tensile Testing Equipment Pull Strength Testing Machine For Tape |
| Product Model | PT-1171B |
| Capacity Selection | 2,5,10,25,50,100,200 kgf |
| Measurement and control software | Windows Under the platform |
| Accuracy of measurement | Be better than±1%(GB-1Level accuracy) |
| Force resolution | 1/200,000 |
| Effective range of measurement | 0.5~100%F.S |
| Deformation display accuracy | Be better than±0.5% |
| Deformation measurement resolution | 0.0001mm |
| Test speed range | 10 500mm/min,Can be arbitrarily set |
| Test maximum stroke | Maximum 650mm (extended 1000mm, need to be customized), not includeing fixture |
| Effective test space | Diameter 120mm range |
| Unit Switch | A variety of measurement units, including the international unit |
| Stop Mode | Upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece failure |
| Power | Stepper motor driver |
| Standard Configuration | Standard fixture1,Pay, 1 sets of software and data lines, power supply line 1, CD 1 CD-ROM operating instructions, product certification 1 copies, 1 copies of product warranty card |
| Optional Configuration | Business computer desk, color printer 1, all kinds of test fixture |
| Machine Size | About 57×47×120cm(W×D×H) |
| Machine Weight | about 70kg |
| Power Supply | 1PH,AC220V,50Hz,10A Or specify |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Machine Type | Manual |
| Model Name/Number | AATCC |
| Usage | Industrial |
| Brand | AATCC |
| Width | 80 mm |
| Depth | 230 mm |
| Color | Grey |
AATCC standard gray card imported from United States. It is used to evaluate the Color Staining & Change in Color in the color fastness tests. The gray card is widely used in the American standard, also often used in the famous sports brand.
This product conforms to the standard:
AATCC 6,8,15,16,61,106,107,116,132,133,163; ISO 105/A03 ... and more.
Common color fastness test are:
Rubbing fastness, color fastness to light, color fastness to washing and the fastness to water, the fastness to dry cleaning, heat resistant fastness, dyestuff during storage, migration, acid and alkali spot color fastness to..
Original specification: Grade1 ~ 5, half level increasing, within the packing set
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Model Name/Number | Hor Plate with Stirrer |
| Brand | Sri Balaji |
| Material | Cast Iron |
| Warranty | 1 year |
| Hotplate Surface | without hotplate, with hotplate |
| Voltage | 230 V |
| Plates Material | SS |
To heat solutions with simultaneous stirring option.
Teflon coating on heating plate gives long life of the plate. Magnetic paddle supplied is coated with Teflon to tolerate high temperature & chemicals to be heated.
With thermostat to regulate heat transfer rate. Temperature ambient up to 100°C. Complete with all accessories – 1 Teflon stirring Paddle & calibration certificate (Traceable to NABL).Additional Information:
Product Details:
| Material | MS, Aluminium |
| Brand | Sri Balaji |
| Temp. Range | R.T. ~ 240 Deg. C |
| Timer | 1 ~ 249s, automatically stops heating and alarms |
| Each heating plate can be set heating | heating ON or heating OFF |
| Accuracy | +/- 2 Deg. C |
| Pressure | 4kPa+/-1kPa |
| Heating temp. control mode | Individual control for each top and bottom plate |
| 3 stations with heating plate dimensions | 120mm x 50mm |
Heating plate temperature and test time are adjustable, fitted with microprocessor temperature controller and the top plate with precisely controlled weight. The independent heating plate ensures controlling test temperature and thickness of sample individually.
Product Details:
| Automation Grade | Automatic |
| Brand | Sri Balaji |
| Fabric Pilling Tester | 1,2,YG511-VI |
| Weight | 50Kg,90Kg,110Kg |
| Number Of Pilling Drums | 2,4,6 |
| Volume Of Drum | 235x235x235mm (LxWxH) |
| Timer Range | 0-99h 99min |
| Counter | 2-99999 |
| Specimen Mounting Tube Size And Weight | 32x140 mm,52.5g |
| Power Supply | AC220V-/+10%,50Hz,120W |
| Instrument Size | 860x480x500mm,860x480x880mm |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Mild Steel |
| Color | Blue |
| Packaging Type | Box |
v Used to determine the crease recovery angle of any fabrics.
v 10N+9.63N weight supplied as per ISO Standard.
v 500gm weight supplied as per AATCC Standard.
v Supplied with two templates for ISO & AATCC Standard.
v Calibrated dial graduated in degree for access accurate recovery angle.
v Complete with all the accessories- Dead Weight both as per ISO as well as AATCC, Specimen Tweezer, 2 Nos. Specimen cutting Templates.
v Supplied with calibration certificate (Traceable to NABL).
Additional Information:
Product Details:
| Model | RS-8306 |
| Automation Grade | Semi-Automatic |
| Display Type | Digital |
| Brand | Sri Balaji |
| Material | SS |
| Dimension | 565x565x325mm (WxDxH) |
| Current | 3A |
3/5
Reviewed by 3 Users
Most Relevant Reviews